Plantronics CT14 - Hooking up the Base; Charging the Dial Pad

6
Hooking Up the Base
Charging the Dial Pad
1 Insert the dial pad into the charging cradle on the base.
Charge for 15 – 20 hours. The CHARGE indicator light will go on.
2 Once the dial pad is fully charged,
plug one end of the telephone cord into the base and plug the other
end into an active telephone outlet.
1 Connect the AC adapter power cord to the base and an active
AC outlet.
2 Route the power cord as shown in the illustration.
3 Raise the Base Antenna to a vertical position.
Back View