14
Settings
Re-registering the Dial Pad
After the dial pad is de-registered, you must re-register the dial pad before you
can use it.
1 Place the dial pad in the base cradle for several seconds.
2 When the dial pad has registered to the base, the LCD will display
Registration complete, then show the dial pad ID number.
If the display shows Registration failed, try the process again.
Calling Features
Muting the Ringer (Temporarily)
The dial pad must be off the base to mute the ringer.
1 While the phone is ringing, press
or to mute the ringer
for this call.
2 The phone will ring again on the next call.
Placing a Call on Hold
1 During a call, press
to place the caller on hold.
The display screen will read Line On Hold.
2 To return to the party on hold, press
.
The phone will return to the holding party.
NOTE Once five minutes has passed, the on hold party’s line will be disconnected.
Redialing a Number
You can quickly redial the last five numbers dialed on each dial pad.
1 With the phone in standby, press the to open the redial list.
2 Use
and
or to scroll through the redial list.
3 When you find the number you want to dial, press
.
NOTE You can also press
before you open the
redial list. Find the phone number you want to dial, and then press
.
To Next Page
Loading...
