Plasson PFS Monomatic - Page 28

28
EN001 H01
Step Action
2 Display after pairing
2.1
The electrofusion control unit shows the following display.
Display after proceeding in the app
Row 4 briefly shows the text "BT active". The electrofusion control unit indicates that it is operated
by a mobile device.
2.2
Now continue to operate the controller using the "ElectroFusion Studio" app on your mobile
device. The electrofusion control unit shows the displays in accordance to the currently active step
in the welding procedure.
#10020981 ↵Menu
Waiting for App
BT active