Plasson PFS Monomatic - Page 34

34
EN001 H01
Step Action
12
OPT
OPTIONAL: Display of weld-related data
12.1
OPT
After completion of the welding procedure, the following information of the welding can be
displayed by keeping the ▲-button on the keypad pressed.
Display of the welding parameters
Row 1 shows the measured resistance before welding in units of Ohm (Ω).
Row 2 shows the nominal voltage in units of Volt (V).
Row 3 shows welding energy in units of Kilojoule (kJ).
Row 4 shows possible error messages.
13 Back to main display
13.1
By pressing the enter button you can return to the main display.
2.25 Ohm
40 V
10.596 kJ
- OK -