Plasson PFS Monomatic - Page 48

48
EN001 H01
The following table shows the available functions.
Function Description Value Page
Language
Setting the display language
Short code
for language
49
Inv. number
Issuing an inventory number for the electrofusion control
unit
Number 50
Set clock
Setting of time and date*
Time
51
Memory control
Memory control*
ON/OFF
51
Daylight time
Automatic changeover for summer and winter time*
ON/OFF
52
Weldername
Prompt for a welder name after switching on the
electrofusion control unit*
ON/OFF 52
Job no.
Mandatory input of a job number*
ON/OFF
52
South
Summer-/Winter time for the southern hemisphere*
ON/OFF
53
Cont. numbers
Consecutive numbering of the reports*
ON/OFF
53
Clamping
Additional prompt for clamping before the welding
procedure
ON/OFF 54
Code Lock
Activate the locking functions of the controller
ON/OFF
55
Code Sys.
Locking of the system configuration
ON/OFF
56
Code Del.
Locking the option for erasure of reports*
ON/OFF
57
Secure Data
Mandatory input of a code when trying to access report
erasing function*
ON/OFF 58
BT on
Switching Bluetooth on and off***
ON/OFF
58
BT only
Operation of the device only possible by app via
Bluetooth***
ON/OFF 58
*) Only with electrofusion control units that have data recording capability.
**) Only with electrofusion control units that are SmartFuse capable.
***) Only with electrofusion control units that have Bluetooth functionality.