PLS AR-200 - Daily Maintenance; Weekly Maintenance; Annual Inspection and Maintenance

28
7.3. Beforeeachuse
Prior to each use an inspecon should be completed by the user of the Hoist.
Should any part of the system fail the inspecon, DO NOT use the Hoist.
• Check whether all parts of the Ceiling Hoist are present.
• Check the devices (liing slings) used for loose stching or
loose parts before each use.
• Check the Spreader Bar’s connecon to the Central Suspension
Point. This must not be loose.
• Check the state of the hoisng belt.
7.4. Weeklymaintenance
Weekly maintenance consists of the following acons:
• Checking the operaon of the emergency stop and the height
limit switch (see secons 2.4.2 and 2.4.3).
• Check whether all moving parts can move freely without any
annoying noises.
• Check that the user manual, basic instrucon card and log book
are present.
If you have any doubts about the condion or correct
operaon of the Ceiling Hoist, always contact the technical
department or the distributor.
7 . 5 .  A n n u a l  i n s p e c  o n  a n d  m a i n t e n a n c e 
The Ceiling Hoist must be inspected once a year in accordance with the
NEN-EN-ISO 10535 standard. The chargers should also be inspected every
year in accordance with the applicable requirements. These inspecons
should be carried out by the distributor or by another suitably authorised
body.
The distributor oers you the opon of having your Ceiling Hoist thoroughly
inspected once a year under a maintenance contract. Contact the distributor
for more details about this.