PLS AR-200 - Detachable Version

24
5. Detachableversion
The AR-200 is also available as a detachable version (AR-200D). The Ceiling
Hoist is then ed with a detachable trolley. The Ceiling Hoist can easily be
detached from the trolley by liing it up about 15 mm and turning it
90 degrees. In order to put the Ceiling Hoist back onto the trolley, push the
Ceiling Hoist onto the trolley at a 90-degree angle from the rail. Push the
Ceiling Hoist as far as possible onto the trolley and turn it 90 degrees. The
Ceiling Hoist should now be aached to the trolley again. For extra safety,
the Ceiling Hoist will not work if it is not correctly aached to the trolley.
Figure 13, detaching of the Ceiling Hoist