Plusivo DM501D - 3. Safety Information; General Safety Precautions; Warning Statements; Input Protection Measures

Diode measurement
Buzzer / Continuity measurement
Hold function activated
NCV
NCV test activated
Auto power off indicator
mV, V
Voltage unit
μA, mA, A
Current unit
Ω, kΩ, MΩ
Resistance unit
MKHz
Frequency unit
mF, nF, μF
Capacitance unit
,
Temperature measurement (Celsius, Fahrenheit)
3. Safety Information
* When using this meter, the user must follow all standard safety precautions in the following two
aspects.
• Electric shock protection
• Prevention of misuse of instrument safety procedures
* For your personal safety, please use the test pen supplied with the meter, check before use to make
sure they are not damaged.
To avoid possible electric shock, personal injury or other accidents, please follow the instructions
specified in the printed DM501D manual that comes with the DM501D Multimeter kit purchase.
● Please read this manual carefully before using the instrument and pay attention to the safety
information.
● Strictly observe the operating instructions in this manual before using it. Otherwise, the protective
function of the device may be damaged or weakened.
Complete safety instructions can be found in the DM501D manual that is inside the Multimeter Kit.
Input protection measures
● The limit voltage is 600 V in voltage measurement.
● The voltage limit is 250 ACV or equivalent RMS voltage when measuring frequency, resistor,
buzzer or diode.
● Fuse (F200mA/250 V) to protect when measuring μA and mA.
6
Mastering the Art of Measurement (DM501D Digital Multimeter) r.01 www.plusivo.com