Point Mobile PM451 - Scanner; Turn on the Scanner; Scansettings

PM451 Android 9.0 User Manual
34
© 2024 Point Mobile Co., Ltd. All rights reserved
Scanner
Turn on the Scanner
The scanner is disabled by default. If you want to enable the scanner, follow the steps.
1. Go to
EmKit
or
Settings
and tap
ScanSetting
2. Tap toggle button to turn on/off the barcode scanner
3. Check if the scanner icon( ) is placed on
Status bar
.
ScanSettings
If you turn on the scanner, scanner setting menus will be displayed.
ScanSetting
consists of

Basic

Options

Notification

Wedge

Symbologies

About
Figure 38 Enable the Scanner