4. Remove the cleaner from the pool and
untangle all kinks and coils in the power
cable. Start at the cleaner head. Lay the
cable in the sun to loosen any tangling
memory (Figure 10).
Figure 10. Untangle the power cable
Clean the Filter Canister
The lter canister should be cleaned at the end of
each cycle.
1. Remove the cleaner from the water and let
the remaining water drain.
2. Unlatch the cleaner cover to access the
canister
(Figure 11).
Figure 11. Lift Cleaner Cover
3. Remove the lter canister from the body
(Figure 12).
Figure 12. Remove Filter Canister
5. Empty all debris from the lter canister,
then rinse the canister and the cleaner
using a hose (Figure 13).
Figure 13. Wash Filter Canister
NOTE: Periodically, deep-clean the filter canister with soapy
water and a soft bristle brush to prevent clogging.
11
Robotic Pool Cleaner
|
Owner's Manual Robotic Pool Cleaner
|
Owner's Manual
English
To Next Page
Loading...
Need help?
General
