Polaris PROSPECTOR PRO 2.0 - User Manual

9940495
2 USER MANUAL
ATV TRACK SYSTEM
PROSPECTOR PRO 2.0

Polaris PROSPECTOR PRO 2.0 Specifications

General

Brand	Polaris
Model	PROSPECTOR PRO 2.0
Category	GPS
Language	English

Summary

Introduction

Safety

Warning Stickers

Details warning stickers affixed to track system frames and their importance.

Operation

Safe Operation Practices

Lists essential practices for operating a track-equipped vehicle safely and effectively.

Operating Instructions

Steep Descents

Advises on safe handling and steering techniques for steep descents.

Towing a Vehicle Out of the Snow

Provides specific instructions and cautions for towing stuck vehicles.

Break-In Period

Outlines necessary adjustments and checks during the initial break-in period.

Descending and Being Stuck in Reverse

Provides guidance on how to safely free the system if it gets stuck in snow in reverse.

Driving Across Slopes

Warns about the dangers of driving across slopes and limits bank angle.

Pre-Use Verification

Details essential checks to perform on the system's moving parts before each ride.

Jumping

Strongly advises against jumping, stunts, or extreme applications with the track system.

Specifications

Torque Specifications

Lists recommended torque values for various bolts used in the track system assembly.

Adjustments

Angle of Attack - Front Systems

Provides a detailed step-by-step procedure for adjusting the front track system's angle of attack.

Angle of Attack - Rear Systems

Details the procedure for adjusting the rear track system's angle of attack.

Alignment

Explains the procedure for adjusting vehicle parallelism and toe-in for track systems.

Adjustment Method

Describes the specific method for adjusting the vehicle's steering system alignment.

Measure A

Details how to measure the distance between front wheels on the track systems.

Track Tension

Provides a guide for measuring and adjusting track tension using specific tools and values.

Basic Tuning (Front Track Systems)

Offers tuning guidelines for front track systems based on angle of attack adjustments.

Basic Tuning (Rear Track Systems)

Provides tuning advice for rear track systems related to the stabilizing arm's rubber cone.

Measure B

Details how to measure the distance between rear wheels on the track systems.

Basic Tuning

Discusses the effects of higher and lower track tension on performance and ride.

Storage

Storage

Lists essential maintenance tasks to perform before storing the track system.

Maintenance

Maintenance

Outlines the importance of regular inspection, adjustment, and lubrication for optimal performance.

System

Covers maintenance specifications for the overall system, track, and wheels.

Frame

Lubrication

Wheel Seal Lubrication (narrow Ø134 mm wheels)

Wheel Shaft Lubrication

Hub Lubrication

Wear

Wheels (Ø134 mm - narrow)

Maintenance - Tasks

Lists general maintenance tasks such as inspection, cleaning, adjustment, lubrication, and replacement.

Track

Reference A Wheel Seal Lubrication (Ø202 mm & wide Ø134 mm wheels)

Lubrication - Wheels & Bearings

Maintenance - Specifications

Details system-specific maintenance specifications for visual inspection and alignment.

Wheels

Hub Bearing Seal Lubrication

Wheels (Ø202 mm & Ø134 mm)

Troubleshooting

Abnormal Vibration

Identifies potential causes and corrections for abnormal vibration in the system.

Overheating of System Guiding Components

Unstable Behavior

Lists potential causes and corrections for unstable behavior of the track system.

Loss of Power

Partial or Total Derailing

Lists causes and corrections for partial or total derailing of the track system.

Exploded Views

18-Tooth Sprocket Kit

32 mm Hub Kit

Hardware Kit

Stabilizer Kit

Anti-Rotation (Stabilizing) Arm Kit

Short Track Tensioner

Long Track Tensioner

Front Right Frame Kit

Front Left Frame Kit

Rear Right Frame Kit

Rear Left Frame Kit

Anti-Rotation Bracket Kit

Rear Track

13 mm Hub Kit

Wheel Axle Stabilizer Kit

Front Track