FINAL DRIVE
7.15
U--shaped insert
Coil
Gearcase Cover
Side Cutaway View of Centralized Hilliard Cover
5. Inspect the rollers for nics and scratches. The
rollers must slide up and down and in and out
freely within the roll cage sliding surfaces.
Rollers
FRONT HOUSING
INSTALLA
TION
1. To install gearcase, reverse removal procedure.
Use new spring pin in front prop shaft.
New spring
Pin
2. Add the proper lubricant to the front gearcase.
Check drain plug for proper torque. Refer to Page
2.10 in the maintenance chapter for fill capacities.
Premium Front Housing Fluid
(PN 2871654)
Front Housing Capacity
5.0 fl. oz. (148 ml)
Enfocus Software - Customer Support
To Next Page
Loading...
