Polaris Victory Cross Roads User Manual

106
Audio System Operation
Audio System Power
The ignition key must be in the ACC or ON
position to use the audio system.
With the key in the ACC or ON position and
audio system OFF, the screen will display
“VICTORY”.
Tip: To prevent battery drain, do not leave the key in the ACC position for long periods. VICTORY rec-
ommends using the audio system only when the engine is running.
Press VOL (+) to turn the audio system on. The screen will display the active entertainment
source.
1. Current audio source:
• (U.S.) FM / AM / WX / iPod - AUX / XM
• (Euro) FM / MW / LW / iPod - AUX
2. Station preset number (P1-P15)
3. Stereo indicator
4. Intercom system active (if equipped)
5. CB radio active channel (if equipped)
Tip: The audio system will always display the last active source when turned on.
Audio Volume Control
The driver can adjust volume for the speakers
and turn the speakers off or on.
Audio Volume
Press and release VOL (+) or VOL (-) to raise
or lower volume.
VICTORY
FM
ICOM
CB19
P1 ST
97.1
1
2
5
3
4

Polaris Victory Cross Roads Specifications

General

Horsepower	92 hp
Compression Ratio	9.4:1
Final Drive	Belt
Front Suspension	Telescopic Fork
Displacement	106 ci (1, 731 cc)
Bore x Stroke	101 mm x 108 mm
Fuel System	Electronic Fuel Injection
Transmission	6-speed
Rear Brake	300 mm floating rotor, 2-piston caliper
Wheelbase	65.7 in (1669 mm)
Engine Type	4-stroke, 6-valve, Freedom V-Twin
Rear Suspension	Single, mono-tube gas, cast aluminum with rising rate linkage, preload adjustable spring
Front Brake	Dual 300 mm floating rotors, 4-piston calipers