69
Maintenance
Evaporative Emission Control System (California Models)
1. Inspect all evaporative emission control
system hoses and connections. Make sure
all connections are tight.
2. Inspect connections at the evaporative
emissions canister to be sure they are
secure. The canister is located under the
rear fender.
Fuel System Components
1. Inspect fuel hoses for cracks or damage.
2. Inspect hose connections at the fuel tank
and at the fuel rail for dampness or stains
from leaks.
Fast Idle
A fast idle speed during warm up of between 1200 and 2000 RPM is automatically set by the
EFI system Idle Air Control (IAC). Periodic adjustment is not required.
Crankcase Breather Hose
Inspect the crankcase breather hose for cracks
or damage. Be sure the clamps are in place and
secure.
Evaporative Emissions
Canister (California Models)
To Next Page
Loading...
