35
Instruments, Features and Controls
Fuel Cap
Use the ignition key to lock and unlock the fuel cap.
Always lock the fuel cap before riding. An open
fuel cap could contact the handlebar.
To open the fuel cap, lift the lock cover. Place the
key in the lock and turn it clockwise.
To secure the fuel cap, push the cap down to engage
the latch. Turn the key counter-clockwise to lock
the cap.
Tool Kit
The tool kit can be used to perform most basic
maintenance items. Tools provided in the tool
kit include:
1. 4 mm Ball Drive Allen Wrench
2. 5 mm Ball Drive Allen Wrench
3. 6 mm Ball Drive Allen Wrench
4. 4 mm / 6 mm Open End Wrench
5. 8 mm / 10 mm Open End Wrench
6. Combination Phillips / Slot Screw Driver
7. Rear Shock Absorber / Tire Pressure Gauge
8. Fuse Puller
Saddlebag and Trunk Door Locks
Use the ignition key to lock and unlock the trunk
and saddlebag doors. The doors should be locked
before riding.
Tip: Not all models are equipped with a trunk.
To lock a door, place the key in the lock and turn it
counter-clockwise. To unlock a door, turn the key
clockwise.
After unlocking a door, press the door lock to
release the latch and open the door.
Refer to the Gross Vehicle Weight Rating informa-
tion beginning on page 14 for loading information.
To Next Page
Loading...
Need help?
General
