Polaris Victory Cross Roads User Manual

36
Pre-Ride Inspections
To keep your motorcycle in safe operating condition, always perform the recommended pre-
ride inspections before each ride. This is especially important before making a long trip and
when removing the motorcycle from storage.
WARNING! Failure to perform the recommended pre-ride inspections could result in component failure
while riding, which could result in serious injury or death. Always perform the pre-ride inspections
before each ride. When inspection reveals the need for adjustment, replacement or repair, perform the
service promptly.
You must be familiar with all instruments and controls to perform the pre-ride inspections.
Tip: During the pre-ride inspections you may use products that are potentially hazardous, such as oil or
brake fluid. When using any of these products, always follow the instructions and warnings on the
product packaging.
When inspections reveal the need for adjustment, replacement or repair:
• refer to the maintenance section of this manual
• refer to the service manual
• or see your authorized VICTORY dealer

Polaris Victory Cross Roads Specifications

General

Horsepower	92 hp
Compression Ratio	9.4:1
Final Drive	Belt
Front Suspension	Telescopic Fork
Displacement	106 ci (1, 731 cc)
Bore x Stroke	101 mm x 108 mm
Fuel System	Electronic Fuel Injection
Transmission	6-speed
Rear Brake	300 mm floating rotor, 2-piston caliper
Wheelbase	65.7 in (1669 mm)
Engine Type	4-stroke, 6-valve, Freedom V-Twin
Rear Suspension	Single, mono-tube gas, cast aluminum with rising rate linkage, preload adjustable spring
Front Brake	Dual 300 mm floating rotors, 4-piston calipers