120
XM Radio
Getting Started
The ignition key must be in the ACC or ON
position to use the audio system.
Tip: To prevent battery drain, do not leave the
key in the ACC position for long periods.
VICTORY recommends using the audio sys-
tem only when the engine is running.
Press VOL (+) to turn the audio system on.
Press and release the MODE button until the
XM radio is the active source.
When the XM radio is active, the console
screen will display radio channel, preset
number (if applicable), channel name or cat-
egory, artist, and song title.
XM Radio Reception
If the XM radio system is not receiving a
signal due to being indoors (or any overhead
obstruction), “No Signl” appears on the dis-
play.
Tip: If the antenna is disconnected, “Antenna”
will display.
XM Radio Menu Options
The XM radio system has unique menus
that apply only to this system when the XM
radio is the active source. Some settings
such as bass, treble, fader, etc. apply to both
the audio system and the XM radio system.
Menus specific to the XM radio system are:
XM Display (Category or Channel Name)
XM Category (Rock, Country, Traffic,
Sports, All Channels, Talk News, etc.)
XM Tune Mode (Seek/Scan)
Tip: XM Tune Mode is unique to the XM radio
system.
XM Radio Settings
To access the menus, turn the audio system
power on and change the active source to
XM Radio.
Press the MODE button repeatedly to toggle
to the XM DISPLAY menu.
Press TUNE (+) or TUNE (-) to select CAT-
EGORY or CHANNEL NAME.
In the CATEGORY mode, the category of a
selected station will display in the upper
right corner of the screen.
In the CHANNEL NAME mode, the name
of the selected channel will display.
To Next Page
Loading...
Need help?
General
