113
CB Radio / ICOM System
CB/ICOM Introduction
In the U.S.A., refer to the Federal Commu-
nications Commission (FCC) Plain Rules
pamphlet accompanying this rider’s manual
for a comprehensive guide of citizens band
(CB) radio rules and regulations.
Headset Use
The use of helmet-mounted headsets may be
restricted or prohibited in some areas.
Always obey all applicable regulations and
laws.
The headsets have three separate volume
settings: Intercom (ICOM) volume, CB
receive volume and entertainment (ENT)
volume. See page 110.
Getting Started
Tip: To minimize distractions while riding, always
make adjustments to the CB/ICOM system
prior to operating your motorcycle.
Tip: To prevent battery drain, do not leave the
key in the ACC position for long periods.
VICTORY recommends using the audio sys-
tem only when the engine is running.
The ignition key must be in the ACC or ON
position to use the audio system.
1. Press VOL (+) to turn the audio system
on.
2. Press COM on
the left control to
activate the CB/
COM system.
CB Channels
When the CB radio system is active, “CB”
and the active channel will display.
Press and hold
COM on the upper
left control to
access the
CHANNEL
ADJUST screen.
Push COM or ICOM to change channels.
Tip: Changing to a new channel may require
changing the squelch setting.
Wait 5 seconds or push VOL (+) or VOL (-)
to exit the screen and return to the main dis-
play.
To Next Page
Loading...
Need help?
General
