26
Instruments, Features and Controls
Instrument Cluster (CROSS COUNTRY)
Multi-Function Display
Use the mode button to toggle through the modes of the multi-function display. See page 29.
Permanently Displayed Modes
• Clock
•Gear Position
• Ambient Temperature
Trip Computer Modes
•Odometer
• Trip Odometers (Trip 1, Trip 2)
• Average Fuel Economy
• Average Speed
• Fuel Range
• Instantaneous Fuel Economy
• Trip Hours Meter
Tip: Press and hold the mode button to reset the trip odometer, average fuel economy, average speed
or trip hours meter.
Engine Error Codes
The error screen displays only when the
CHECK ENGINE light is on or when it goes
on and off during one ignition cycle. Error
codes are not stored. When the key is turned
OFF, the code and message is lost, but will
reappear if the fault reoccurs after restarting the
engine.
If the CHECK ENGINE indicator lamp illumi-
nates, retrieve the error codes from the display.
1. If the error codes are not displayed, use the
mode button to toggle until “Err” displays
in the clock area.
2. Record the three code numbers displayed
in the gear position, temperature and
odometer displays.
3. See an authorized VICTORY dealer for
code details and diagnosis.
To Next Page
Loading...
Need help?
General
