Make sure the batteries (not included) have been inserted properly into your digital camera.
Make sure the Micro SD card has been inserted properly into your digital camera.
Micro SD card Class 4 or higher and up to 32GB - not included.
Please see Initial Camera Setup for more information.
Press the Power button to turn your camera ON.
After powering on, the LED light turns on briefly and the LCD screen turns on with your camera in
Photo Capture Mode.
While the camera is on, you can press the Power button down again for a few seconds at
any point to turn your camera OFF.
Your digital camera has an Auto Power Off feature that automatically turns off your camera after a
specific period of time that your camera is left idle. The Auto Power Off settings can be set from
the Auto Power Off settings menu in either Photo Capture Mode or Video Capture Mode.
To Next Page
Loading...
Need help?
General
