several zones for light metering such as complex light conditions, position of subject, brightness,
background, direct light and scenes
Spot – Meters the area within the spot point frame at the center of the LCD to set the exposure
on the subject in the center of the monitor.
1) Press the MENU/OK button to open the menus for the current mode.
2) Press the LEFT or RIGHT button to scroll and select the ‘Metering’ menu.
3) Press the UP or DOWN button to highlight a specific option.
4) Press the MENU/OK button to confirm and select the highlighted menu option.
A selected option icon appears on the selected item.
5) To continue within the menus and select a different menu option:
Press the LEFT or RIGHT button to select the next menu item.
6) To exit the menu view:
Press the MODE button to exit the menu and return to your previous mode.
An icon reflecting your selection is displayed on the LCD screen.
Language Menu
You can select your camera’s language setting by selecting the desired language from the
Language menu.
1) Press the MENU/OK button to open the menus for the current mode.
2) Press the LEFT or RIGHT button to scroll and select the ‘Language’ menu.
3) Press the UP or DOWN button to highlight a specific option.
4) Press the MENU/OK button to confirm and select the highlighted menu option.
A selected option icon appears on the selected item.
5) To continue within the menus and select a different menu option:
Press the LEFT or RIGHT button to select the next menu item.
6) To exit the menu view:
Press the MODE button to exit the menu and return to your previous mode.
To Next Page
Loading...
