Each camera mode has a set of menus specific to that mode.
1) Press the MENU/OK button to open the menus for the current mode.
NOTE: In Playback Mode only, long press the MENU/OK button for approximately 3
seconds until the menu screen appears.
2) Press the LEFT or RIGHT button to scroll between the various menus for the current
mode.
3) Press the DOWN (W) or UP (T) button to highlight the desired setting.
4) Press the MENU/OK button to confirm and save the highlighted menu option.
5) A selection icon appears to the right of the selected menu option. Changes made to
these options remain until you decide to change them again at a later time.
NOTE: Some menu options are single-use functions that are not remembered by the
camera.
6) At any time you can press the MODE (M) button to exit the menus and return to the previous
screen.
NOTE:
At any time you can press the MODE (M) button to exit the menus and return to the previous
screen.
Once you change a setting, the setting is saved by your camera until you manually change the
setting or restore the camera’s default factory settings.
After selecting your desired setting, some settings appear as an icon on the LCD screen in
Capture Mode – indicating the option selected.
To Next Page
Loading...
Need help?
General
