Poly Edge B Series User Manual

List of Feature Keys and Their Functions
Feature Key Stage Description
Call
Appearance
Idle
Connected
Connected HD
Lets you make or receive a single call. You must have an available and
idle call key to make or receive a new call.
The VLKW shows the current call state.
A call key with a shared line. In that case, when no call is on that key, the
VLKW information shows the state of the Shared Call Appearance
(SCA).
Line Monitor
Ringing: at least one
incoming call
Holding: at least one
call holding
In Use: at least one
active call
Idle: no calls
Monitor a Line (voice service installed on the phone). Monitored line
events include:
• Ringing
• Holding
• In Use
• Idle
The VLKW shows the monitored service name and account user name,
which is usually the same as the account number or extension).
This function must be bound to the specific voice service that it monitors.
Speed Dial Shows the configured speed dial number, if assigned. If the speed dial is
bound to a service, it also shows the name of the service. If the speed
dial has a display name configured, the VLKW shows the display name,
for example John Seymour.
Do Not
Disturb
Off On
If the function is bound to a specific voice service, it’s applied to
incoming calls on that service only. Otherwise, it’s applied system-wide
to all incoming calls.
Do Not Ring
Off On
If this function is enabled, incoming calls don’t play an audible ring.
This function can’t be bound to a specific voice service. It’s applied
system-wide to all incoming calls.
Block
Anonymous
Callers
Off On If the function is bound to a specific service, it’s applied to incoming calls
on that service only. Otherwise, it’s applied system-wide to all incoming
calls. If this function is enabled, the phone rejects all incoming calls that
have their Caller ID (name, number, or both) hidden (blocked).
Getting Started with Poly Edge B Series IP Phones
11

Poly Edge B Series Specifications

General

Brand	Poly
Model	Edge B Series
Category	IP Phone
Language	English