Procedure
1. Using the paper clip, press and hold the restore button.
2. In the system web interface, go to Admin Settings > Factory Reset and click Reset.
After about 15 seconds, the system restarts and displays the setup wizard.
Related Links
Right to Erasure on page 12
Factory Restore Your System
A factory restore completely erases the system’s flash memory and restores the system to the software
version and default configuration stored in its factory partition.
A factory restore deletes the following items:
▪ Software updates
▪ Contacts
▪ System configurations
▪ Logs
Procedure
1. Power off the system.
2. Straighten a paper clip and insert it into the reset pinhole.
3. Press and hold the restore button while powering on the system.
4. After the screen shows that system enters the update process, release the reset button.
The system restarts automatically when the process is complete.
Related Links
Right to Erasure on page 12
How Personal Data Is Deleted
16
To Previous Page
Loading...
