Poly G7500 User Manual

Camera Priority
When you connect or disconnect a camera, camera priority determines the primary or active camera.
▪ When you attach a camera to a system that’s powered on, it automatically becomes the current
people camera.
▪ If you attach a camera during a call, it automatically becomes the current people camera.
▪ If you disconnect the current people camera, the system falls back to the next priority camera.
The system observes the following camera type priority:
1. Embedded camera
2. HDCI camera
3. USB camera
4. HDMI source set to display as people
Select the Primary Camera from the Local Interface
In Poly Video Mode, when you attach multiple cameras to the system, select the primary camera from the
local interface.
Procedure
1. Go to Menu > Camera > Select Camera.
2. Select a camera from the list.
The selected camera becomes the primary camera.
Cameras
29

Poly G7500 Specifications

General

Network	Gigabit Ethernet
Bluetooth	Bluetooth 5.0
Interoperability	SIP, H.323
Audio Features	NoiseBlockAI, Acoustic Fence
Camera	Supports EagleEye cameras
Connectivity	HDMI, USB, Ethernet
Video Standards and Protocols	H.264 AVC, H.265
Video Input	1 x HDMI
Video Output	2 x HDMI
Audio Standards	G.711, G.722, G.719
Audio Input	3.5 mm line-in
Audio Output	3.5 mm line-out, HDMI
Wireless	Wi-Fi 802.11ac
Security	AES-128
Daisy Chain	Supported with microphone arrays
Power Source	AC power
Video Resolution	Up to 4K Ultra HD (3840 x 2160) at 30 fps