Poly G7500 User Manual

Using the Poly Control App
Topics:
▪ Control the System with the Poly Control App
The Poly Control App enables you to control a video system using a personal device, such as your mobile
device or computer.
After you connect your personal device to the video system, you can place and manage calls, control
camera settings, and interact with shared content.
The following features aren’t available on the computer or mobile device controlling the system:
▪ Device mode
▪ Environment
▪ System settings (only system information displays)
Control the System with the Poly Control App
You can use the Poly Control App on your computer or mobile device to control a video system.
You must be in the room with the video system and connect the mobile device to the same wireless
network as the system to use the Poly Control App.
Procedure
1. In a web browser on your computer or mobile device, enter https://<systemIPaddress>/
control.
The website displays with the system’s room name and IP address.
2. Select Connect.
3. On your computer or mobile device, enter the four-digit code that displays on the system monitor.
Your computer or mobile device displays a user interface similar to the video system. You can then
use your personal device to control the system.
33

Poly G7500 Specifications

General

Network	Gigabit Ethernet
Bluetooth	Bluetooth 5.0
Interoperability	SIP, H.323
Audio Features	NoiseBlockAI, Acoustic Fence
Camera	Supports EagleEye cameras
Connectivity	HDMI, USB, Ethernet
Video Standards and Protocols	H.264 AVC, H.265
Video Input	1 x HDMI
Video Output	2 x HDMI
Audio Standards	G.711, G.722, G.719
Audio Input	3.5 mm line-in
Audio Output	3.5 mm line-out, HDMI
Wireless	Wi-Fi 802.11ac
Security	AES-128
Daisy Chain	Supported with microphone arrays
Power Source	AC power
Video Resolution	Up to 4K Ultra HD (3840 x 2160) at 30 fps