Polycom 1725-11530-310 - Page 118

Administrator’s Guide SoundPoint IP / SoundStation IP
4 - 64
To set up a dual registration with Microsoft Live Communications Server 2005 as
the presence server:
1. (Optional) Modify the sip.cfg configuration file as follows:
a Open sip.cfg in an XML editor.
b Locate the feature parameter.
c For the
feature.1.name = presence attribute, set
feature.1.enabled to 1.
d For the
feature.2.name = messaging attribute, set
feature.2.enabled to 1.
e Locate the
voIpProt parameter.
f If SIP forking is desired, set
voIpProt.SIP.ms-forking attribute to 1.
Refer to SIP <SIP/> on page A-10.
g Save the modified sip.cfg configuration file.
2. Modify the phone1.cfg configuration file as follows:
a Open phone1.cfg in an XML editor.
b Locate the registration parameter.
c Select a registration to be used for the Microsoft Live Communications
Server 2005.
Typically, this would be 2.
d Set the
reg.x.address to the LCS address.
For example,
reg.2.address = "7778"
e Set the reg.x.server.y.address to the LCS server name.
f (Optional) Set the
reg.2.server.y.transport attribute to
TCPpreferred or TLS.
Your selection depends on the LCS configuration.
g Set
reg.x.auth.userId to the phone's LCS username.
For example,
reg.2.auth.userId = "jbloggs"
h Set reg.x.auth.password to the LCS password.
For example,
reg.2.auth.password = "Password2"
i Locate the roaming_buddies attribute.
j Set the
roaming_buddies.reg element to the number corresponding
to the LCS registration.
For example,
roaming_buddies.reg = 2
Refer to Roaming Buddies <roaming_buddies/> on page A-122.
k Locate the
roaming_privacy attribute.