Polycom 1725-11530-310 - Backgrounds <Bg

Configuration Files
A - 77
Backgrounds <bg/>
The backgrounds used by the SoundPoint IP 550, 560, 650, and 670 phones are
defined in this section. In the following table, w=1 to 3, x=1 to 6.
This configuration attribute is defined as follows:
Attribute
Permitted
Values
Default Interpretation
bg.hiRes.color.selection w,x 1,1 Specify which type of background (w) and index
for that type (x) is selected on reboot where w=1
to 3, x=1 to 6.
bg.hiRes.color.pat.solid.x.
name
any string Solid pattern name.
For x=1: Light Blue, x=2: Teal, x=3: Tan, x=4:Null
The screen background layouts.
For x=1, red (151), green, (207), blue (249)
For x=2, red (73), green (148), blue (148)
For x=3, red (245), green (157), blue (69)
For x=4, red (Null), green (Null), blue (Null)
bg.hiRes.color.pat.solid.x.red 0 to 255
bg.hiRes.color.pat.solid.x.
green
0 to 255
bg.hiRes.color.pat.solid.x.blue 0 to 255
bg.hiRes.color.bm.x.name any string built-in
value of
“Thistle”
Graphic files for display on the phone and
Expansion Module.
For x=1:
• name is “Leaf.jpg”
name is “LeafEM.jpg”
For x=2:
• name is “Sailboat.jpg”
name is “SailboatEM.jpg”
For x=3:
• name is “Beach.jpg”
name is “BeachEM.jpg”
For x=4:
• name is “Palm.jpg”
name is “PalmEM.jpg”
For x=5:
• name is “Jellyfish.jpg”
name is “JellyfishEM.jpg”
For x=6:
• name is “Mountain.jpg”
name is “MountainEM.jpg”
Note: If the file is missing or unavailable, the
built-in default solid pattern is displayed.
bg.hiRes.color.bm.x.em.name any string