EasyManua.ls Logo

Polycom 1725-11530-310 - Basic TCP;IP <TCP_IP

Polycom 1725-11530-310
373 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Administrator’s Guide SoundPoint IP / SoundStation IP
A - 58
Call Control <callControl/>
These parameters apply to call control packets, such as the network protocol
signaling.
Basic TCP/IP <TCP_IP/>
This attribute includes:
Network Monitoring <netMon/>
Time Synchronization <sntp/>
Port <port/>
Keep-Alive <keepalive/>
Attribute
Permitted
Values Default Interpretation
qos.ip.callControl.dscp 0 to 63 or
EF or
any of
AF11,AF12,
AF13,AF21,
A F 2 2 , A F 2 3 ,
AF31,AF32,
AF33,AF41,
AF42,AF43
Null This parameter allows the DSCP of
packets to be specified. If set to a
value this will override the other
qos.ip.callControl
parameters. Default of Null which
means the other
qos.ip.callControl
parameters will be used.
qos.ip.callControl.min_delay 0, 1 1 If set to 1, set min-delay bit in the IP
TOS field of the IP header, or else
don’t set it.
qos.ip.callControl.max_throughput 0, 1 0 If set to 1, set max-throughput bit in
the IP TOS field of the IP header, or
else don’t set it.
qos.ip.callControl.max_reliability 0, 1 0 If set to 1, set max-reliability bit in
the IP TOS field of the IP header, or
else don’t set it.
qos.ip.callControl.min_cost 0, 1 0 If set to 1, set min-cost bit in the IP
TOS field of the IP header, or else
don’t set it.
qos.ip.callControl.precedence 0-7 5 If set to 1, set precedence bits in the
IP TOS field of the IP header, or
else don’t set them.

Table of Contents

Related product manuals