4 - 1
4
Configuring Your System
After you set up your SoundPoint IP / SoundStation IP phones on the
network, you can allow users to place and answer calls using the default
configuration, however, you may be require some basic changes to optimize
your system for best results.
This chapter provides information for making configuration changes for:
• Setting Up Basic Features
• Setting Up Advanced Features
• Setting Up Audio Features
• Setting Up Security Features
This chapter also provides instructions on:
• Configuring SoundPoint IP / SoundStation IP Phones Locally
To troubleshoot any problems with your SoundPoint IP / SoundStation IP
phones on the network, refer to Troubleshooting Your SoundPoint IP /
SoundStation IP Phones on page 5-1. For more information on the
configuration files, refer to Configuration Files on page A-1.
Setting Up Basic Features
This section provides information for making configuration changes for the
following basic features:
• Call Log
• Call Timer
• Call Waiting
• Called Party Identification
• Calling Party Identification
• Missed Call Notification
To Next Page
Loading...
