Polycom 1725-11530-310 - Page 203

Configuration Files
A - 49
Receive Equalization <rxEq/>
These settings control the performance of the receive equalization feature.
Polycom recommends that you do not change these values.
Attribute Default
voice.rxEq.hs.IP_330.preFilter.enable 1
voice.rxEq.hs.IP_430.preFilter.enable 1
voice.rxEq.hs.IP_500.preFilter.enable 1
voice.rxEq.hs.IP_600.preFilter.enable 1
voice.rxEq.hs.IP_601.preFilter.enable 1
voice.rxEq.hs.IP_650.preFilter.enable 1
voice.rxEq.hs.IP_330.postFilter.enable 0
voice.rxEq.hs.IP_430.postFilter.enable 0
voice.rxEq.hs.IP_500.postFilter.enable 0
voice.rxEq.hs.IP_600.postFilter.enable 0
voice.rxEq.hs.IP_601.postFilter.enable 0
voice.rxEq.hs.IP_650.postFilter.enable 0
voice.rxEq.hd.IP_330.preFilter.enable 0
voice.rxEq.hd.IP_430.preFilter.enable 0
voice.rxEq.hd.IP_500.preFilter.enable 0
voice.rxEq.hd.IP_600.preFilter.enable 0
voice.rxEq.hd.IP_601.preFilter.enable 0
voice.rxEq.hd.IP_650.preFilter.enable 1
voice.rxEq.hd.IP_330.postFilter.enable 0
voice.rxEq.hd.IP_430.postFilter.enable 0
voice.rxEq.hd.IP_500.postFilter.enable 0
voice.rxEq.hd.IP_600.postFilter.enable 0
voice.rxEq.hd.IP_601.postFilter.enable 0
voice.rxEq.hd.IP_650.postFilter.enable 0