Polycom 1725-11530-310 - Page 215

Configuration Files
A - 61
tcpIpApp.sntp.daylightSavings.start.date 1-31 8 If fixedDayEnable is set to
1, use as day of the month
to start DST.
If
fixedDayEnable is set to
0, us the mapping: 1 = the
first occurrence of a given
day-of-the-week in a month,
8 = the second occurrence
of a given day-of-the-week
in a month, 15 = the third
occurrence of a given
day-of-the-week in a month,
22 = the fourth occurrence
of a given day-of-the-week
in a month
tcpIpApp.sntp.daylightSavings.start.time 0-23 2 Time of day to start DST in
24 hour clock.
Mapping: 2=2 am, 14=2 pm
tcpIpApp.sntp.daylightSavings.start.dayOfWeek 1-7 1 Day of week to apply DST.
Mapping: 1=Sun, 2=Mon,
..., 7=Sat
tcpIpApp.sntp.daylightSavings.start.dayOfWeek.
lastInMonth
0, 1 0 If set to 1 and
fixedDayEnable is set to 0,
DST starts on the last day
(specified by
start.dayOfWeek ) of the
week in the month. The
start.date is ignored.
tcpIpApp.sntp.daylightSavings.stop.month 1-12 11 Month to stop DST.
tcpIpApp.sntp.daylightSavings.stop.date 1-31 1 Day of the month to stop
DST.
tcpIpApp.sntp.daylightSavings.stop.time 0-23 2 Time of day to stop DST in
24 hour clock.
tcpIpApp.sntp.daylightSavings.stop.dayOfWeek 1-7 1 Day of week to stop DST.
tcpIpApp.sntp.daylightSavings.stop.dayOfWeek.
lastInMonth
0, 1 0 If set to 1 and
fixedDayEnable set to 0,
DST stops on the last day
(specified by
stop.dayOfWeek ) of the
week in the month. The
stop.date is ignored.
Attribute
Permitted
Values Default Interpretation