Polycom 1725-11530-310 - Page 258

Administrator’s Guide SoundPoint IP / SoundStation IP
A - 104
softkey.x.use.alerting 0 (default)
1
Null If set to 0 or Null, the soft key is not
displayed in the alerting state.
If set to 1, the soft key is displayed in the
alerting state.
softkey.x.use.dialtone 0 (default)
1
Null If set to 0 or Null, the soft key is not
displayed in the dialtone state.
If set to 1, the soft key is displayed in the
dialtone state.
softkey.x.use.proceeding 0 (default)
1
Null If set to 0 or Null, the soft key is not
displayed in the proceeding state.
If set to 1, the soft key is displayed in the
proceeding state.
softkey.x.use.setup 0 (default)
1
Null If set to 0 or Null, the soft key is not
displayed in the setup state.
If set to 1, the soft key is displayed in the
setup state.
softkey.x.use.hold 0 (default)
1
Null If set to 0 or Null, the soft key is not
displayed in the hold state.
If set to 1, the soft key is displayed in the
hold state.
softkey.feature.newcall 0
1 (default)
Null If set to 0, the New Call soft key is not
displayed when there is another way to
place a call.
If set to 1 or Null, the New Call soft key is
displayed.
softkey.feature.endcall 0
1 (default)
Null If set to 0, the End Call soft key is not
displayed.
If set to 1 or Null, the EndCall soft key is
displayed.
softkey.feature.split 0
1 (default)
Null If set to 0, the Split soft key is not
displayed.
If set to 1 or Null, the Split soft key is
displayed.
softkey.feature.join 0
1 (default)
Null If set to 0, the Join soft key is not
displayed.
If set to 1 or Null, the Join soft key is
displayed.
softkey.feature.forward 0
1 (default)
Null If set to 0, the Forward soft key is not
displayed.
If set to 1 or Null, the Forward soft key is
displayed.
Attribute
Permitted
Values Default Interpretation