Polycom 1725-11530-310 - Page 266

Administrator’s Guide SoundPoint IP / SoundStation IP
A - 112
Do Not Disturb <donotdisturb/>
This configuration attribute is defined as follows:
Automatic Off-Hook Call Placement <autoOffHook/>
An optional per-registration feature is supported which allows automatic call
placement when the phone goes off-hook.
In the following table, x is the registration number. IP 301, 320, 330, 430: x=1-2;
IP 501: x=1-3; IP 550, 560: x=1-4; IP 600: x=1-6; IP 601: x=1-12;
IP 650, 670: x=1-34; IP 4000: x=1; IP 6000: x=1; IP 7000: x=1.
Missed Call Configuration <serverMissedCall/>
The phone supports a per-registration configuration of which events will
cause the locally displayed “missed calls” counter to be incremented.
In the following table, x is the registration number. IP 301, 320, 330, 430: x=1-2;
IP 501: x=1-3; IP 550, 560: x=1-4; IP 600: x=1-6; IP 601: x=1-12;
IP 650, 670: x=1-34; IP 4000: x=1; IP 6000: x=1; IP 7000: x=1.
Attribute
Permitted
Values Default Interpretation
call.donotdisturb.perReg 0, 1 0 If set to 1, the DND feature will allow selection of
DND on a per-registration basis.
NOTE: If
voIpProt.SIP.serverFeatureControl.dnd is
set to 1 (enabled), this parameter is ignored. For
more information, refer to SIP <SIP/> on page
A-10.
Attribute Permitted Values Default Interpretation
call.autoOffHook.x.enabled 0, 1 0 If set to 1, a call will be
automatically placed to
the contact specified
upon going off-hook on
this registration.
call.autoOffHook.x.contact ASCII encoded string containing digits
(the user part of a SIP URL) or a string
that constitutes a valid SIP URL (6416
or 6416@polycom.com)
Null
Attribute
Permitted
Values
Default Interpretation
call.serverMissedCall.x.enabled 0, 1 0 If set to 0, all missed-call events will increment
the counter.
If set to 1, only missed-call events sent by the
server will increment the counter.
NOTE: This feature is supported with the
Sylantro call server only.