Polycom CX5000 Deployment Guide

Polycom CX5000 Deployment Guide
4 Polycom, Inc.
Diagnostics Screen
The Diagnostics screen (Figure 4) displays four icons that represent the main subsystems of a Polycom
CX5000 device. (This screen also displays the previously discussed status indicators.) From left to
right and top to bottom, the icons represent audio subsystem diagnostics, video subsystem diagnostics,
systems diagnostics, and network subsystem diagnostics.
 Audio subsystem - includes audio health (Pass or Fail), whether satellite microphones are
connected, the currently most active microphone, and active media.
 Video subsystem - includes the camera ID, camera health (Pass or Fail), white balancing settings,
lighting frequency, and active media.
 System - includes the URL of the update server, the current time, the time of the last update, the
time zone, and system health (Pass or Fail).
 Network subsystem - includes the IP address for the Polycom CX5000 device, subnet mask, the
IP address of the default gateway, and the IP address of the DNS server.
If you encounter problems with a Polycom CX5000 device, the hardware diagnostics screens (audio,
video, and system) should be the first place you check.
Figure 4. Diagnostics Screen

Polycom CX5000 Specifications

General

Dimensions (WxDxH)	350 x 350 x 360 mm
Networking features	Fast Ethernet
Maximum frame rate	15 fps
ITU-supported standards	ITU-T P.300
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	15 - 85 %
USB 2.0 ports quantity	2
Ethernet LAN (RJ-45) ports	1

Weight and Dimensions

Weight	3150 g