Polycom G7500 - Page 46

Specifies the Phase 2 authentication method.
You should set this if device.net.secondaryNetwork.wifi.securityType="802_1xEAP".
NONE (default)
MSCHAPV2
GTC
device.net.secondaryNetwork.wifi.WPA.password
Specifies an encryption passphrase (like a password) for the Wi-Fi network. You must enter the
passphrase to connect to the Wi-Fi network.
You should set this if device.net.secondaryNetwork.wifi.securityType="WPA_PSK".
String
device.net.secondaryNetwork.wifi.dot1xEAP.identity
Specifies the login username for WPA-Enterprise (802.1xEAP).
You should set this if device.net.secondaryNetwork.wifi.securityType="802_1xEAP".
String
device.net.secondaryNetwork.wifi.dot1xEAP.password
Specifies the login password for WPA-Enterprise (802.1xEAP).
You should set this if device.net.secondaryNetwork.wifi.securityType="802_1xEAP".
String
device.net.secondaryNetwork.dns.server.1
Specifics the DNS server address on the Wi-Fi network.
String
device.net.secondaryNetwork.dns.server.2
Specifics the alternate DNS server address on the Wi-Fi network.
String
device.net.secondaryNetwork.ipAddress
Specifies the system IPv4 address on the Wi-Fi network.
String
0.0.0.0
device.net.secondaryNetwork.ipGateway
Specifies the IP gateway for the Wi-Fi network.
String
0.0.0.0
device.net.secondaryNetwork.mode
Specifies how you want to configure your system Wi-Fi network IP address.
If you set "Automatically", make sure you have a DHCP server in your environment.
Automatically (default)
Manually
Network Parameters
Polycom, Inc. 44