Remote Control
The diagram below illustrates the Polycom Remote Control and
highlights some of the more commonly used buttons that are
supported in OTN videoconferences.
Press to power the system on; hold to power o
View button presses and various menus
Select a camera or other video source
Start and stop sending content to far sites
Zoom the camera in or out
Return to the home screen
View or manage directory entries
End a call
Delete letters or numbers
Enter letters or numbers; move the
camera to a stored preset position
Control a programmed recording
device or Polycom RSS
Access the online help; see
system status in a call
Cycle through display layouts
Select a far-site camera or video source
Navigate through menus
Select a near-site camera or video source
Return to the previous screen
Place or answer a call
Display the onscreen keyboard
to enter text
Display menu of optional features
Store camera presets (when followed by
a number); delete all camera presets
Conrm your current selection; perform
functions on highlighted items
Press once for a dot, twice
for a colon, three times for
an asterisk
Increase or decrease the sound
you hear from the far sites
Mute the microphone audio you’re
sending to the far sites
Using the Remote Control
You use the remote control to place calls, adjust the volume, navigate screens, and select options.
To Next Page
Loading...
