Polycom IP 331 - Basic telephony features; How to place a call

• How to place a call ?
• Using the handset:
1. Type the number on keypad
2. Press the Dial button (13)
3. Pick-up the handset
• Using the speaker:
1. Type the number on keypad
2. Press the Speaker button
3. Press the Dial button (13)
1. Pick-up the handset
2. Type the number
3. Push the Dial button (13)
1. Press the Speaker button
2. Type the number
3. Push the Dial button (13)
OR
OR
Note :
 You must add a « 0 » before any external number
 Emergency numbers can be dialed without any preceeding « 0 » (100, 110,…)
 To redial your last number : click twice the button « DIAL »
Basic telephony features