Procedure
1. Attach the two shoulder screws from the mounting kit to the bottom of the system.
2. Using the four 4.5 mm screws included in the mounting kit, attach the mounting plate to the back
of the monitor.
3. With the back panel facing up, insert the heads of the two shoulder screws on the system into the
corresponding holes on the mounting plate. Then, gently push the system down until you hear a
lock that indicates the device is secure.
4. Connect the cables and position them away from foot traffic to prevent accidental disconnections
or damage.
System Hardware
Polycom, Inc. 14
To Next Page
Loading...
