Polycom Pano - Polycom Pano App; Install Application Software

General Settings
Topics:
▪ Set the Local Interface Language
▪ Set the System Web Interface Language
▪ Set the Date and Time
▪ Set Device and Room Names
▪ Register with Polycom Cloud Service
▪ Enable Screen Mirroring
▪ Disable Screen Mirroring
The General Settings tab in the system web interface lets you configure basic features of your Pano
device, such as its language and if you want to allow screen mirroring.
Related Links
Access the System Web Interface on page 9
Set the Local Interface Language
You can change the language that users see on the Pano device local interface.
Procedure
1. In the system web interface, go to General Settings > System Language.
2. Select a language.
Set the System Web Interface Language
You can change the language that administrators see in the Pano system web interface.
Procedure
1. In system web interface title bar, select the language you want from the dropdown list.
Set the Date and Time
You can change the time settings in the Pano system web interface.
Procedure
1. In the system web interface, go to General Settings > Date Time.
2. Configure the following settings:
Polycom, Inc. 17