Polycom Pano - Connecting to a Polycom Pano or Polycom Video System

Procedure
1. In the system web interface, go to General Settings > Cloud. (Skip this step if you are running
the setup wizard.)
2. Select Sign In.
3. Enter your Email ID and Password.
The Email ID was activated through the Polycom Cloud Service Administration portal and enables
the system to locate your account.
4. Enter a Room Name.
A Room Name is how users identify a Pano system they want to connect to from a device or the
Pano App. Polycom recommends that you use a name that is associated with the system's
location (e.g., a conference room).
5. Optional: Deselect the Enable Security Code checkbox if you do not want users to enter a code
to connect their device to the Pano system.
6. Keep the automatically generated Device Name or enter a new one.
This name identifies the Pano device in the Polycom Cloud Service portal dashboard.
7. Select Finish when prompted.
Related Links
Set Up System Manually on page 16
Provision the System on page 16
Provisioning Service on page 21
Choose Software Update Location in System Web Interface on page 45
Modes of Operation on page 15
Enable Screen Mirroring
By default, screen mirroring is enabled for AirPlay- and Miracast-certified devices. Screen mirroring lets
users connect and share content from their personal devices.
Note: The system does not automatically allow screen mirroring when you enable the wireless settings.
Procedure
1. In the system web interface, go to General Settings > Screen Mirroring.
2. Select the screen mirroring options that you want available for sharing content.
The Pano system updates, and the screen mirroring options available to users display in the home screen
animation.
Related Links
Enable Wireless Settings on page 34
Disable Screen Mirroring
You can turn off screen mirroring options for AirPlay- and Miracast-certified devices.
General Settings
Polycom, Inc. 19