Polycom Pano - Supported HDMI Output Resolutions; Supported Displays; Tested Touch-Capable Monitors; Configure Monitor Settings

Supported HDMI Output Resolutions
The Pano device supports the following output resolutions for the local interface monitor connection.
Supported HDMI Output Resolutions and Frame Rates
Resolution Frame Rates
2160p 25, 30, 50, 60
1080p 25, 30, 50, 60
720p 25, 30, 50, 60
Supported Displays
The Pano device can present content streams on user-supplied non-touch and touch displays that
support up to 4K (UHD) 60 fps RGB444 output over HDMI 2.0.
Polycom recommends that you use a display that supports the same input and visual output.
Tested Touch-Capable Monitors
The Pano device supports single- and multi-touch input from a HID-compliant device.
The following touch-capable monitors have been tested with the device and provide an optimal touch
experience.
Tested Touch-Capable Monitors
Size (inches) Touch Technology Brand Model/Part Number
22 Capacitive Elo
®
E497001
46 Capacitive Elo
®
ET4602L
55 InGlass
™
Dell C5518QT (black)
65 InGlass Volanti VD-6500-0B0C-1100 (black)
65 InGlass Volanti VD-6500-0Q0C-16P3 (white)
70 IR Sharp PN-L703B (black)
Configure Monitor Settings
You can configure the Pano system monitor settings to optimize the video output.
Procedure
1. In the system web interface, go to General Settings > Monitor.
Monitor Settings
Polycom, Inc. 28