Create a Certificate Signing Request
If a PKI is deployed in your environment, creating a CSR is the first step in making sure your Pano system
is trusted by its network peers.
Procedure
1. In the system web interface, go to Security > Certificates.
2. Select Create Certificate Signing Request (CSR).
3. In the Certificate Details form, complete the following fields and select Create.
CSR Information Description
Hash Algorithm Specifies the hash algorithm for the CSR: SHA-256 (recommended)
or SHA-1 (not recommended).
Common Name (CN) Specifies the system name. Polycom recommends the following
guidelines for this field:
▪ For systems registered in DNS, use the system's fully qualified
domain name (FQDN).
▪ For systems not registered in DNS, use the system's IP address.
Maximum characters: 64 (truncated if necessary). Default is blank.
Organizational Unit (OU) Specifies the business group defined by your organization. Default is
blank. Maximum characters: 64.
Note: The system supports only one OU field. If you want the CA-
signed certificate to include more than one OU, download and
manually edit the CSR.
Organization (O) Specifies your organization's name. Default is blank. Maximum
characters: 64.
City or Locality (L) Specifies the city where your organization is located. Default is blank.
Maximum characters: 128.
State or Province (ST) Specifies the state or province where your organization is located.
Default is blank. Maximum characters: 128.
Country (C) Displays the country selected in the setup wizard. Cannot be changed
here.
SAN: FQDN Specifies the FQDN assigned to the system. It is the same as the
Common Name (CN) but not truncated. Default is blank. Maximum
characters: 253.
SAN: Additional Name Specifies an additional system name. Default is blank. Maximum
characters: 253.
SAN: IPv4 Address Default is the system's IPv4 address. Maximum characters: 15
Security
Polycom, Inc. 31
To Next Page
Loading...
