Polycom Pano - Disable Wireless Settings; Port Usage; Port Connections

Procedure
1. In the system web interface, go to Security Settings > Wireless.
2. Do one or more of the following:
▪ Select the Enable Wi-Fi option to enable screen mirroring for Miracast-certified devices.
▪ Select the Enable Bluetooth option to enable screen mirroring for AirPlay-certified devices.
Related Links
Enable Screen Mirroring on page 19
Disable Wireless Settings
By default, the wireless communication features are enabled and can be disabled as needed.
Remember the following when disabling the wireless features:
▪ Disabling Wi-Fi turns off screen mirroring with Miracast-certified devices.
▪ Disabling Bluetooth turns off screen mirroring with AirPlay-certified devices and prevents those
devices and the Pano App from automatically discovering a Pano system. (The Pano App can still
connect with the system IP address.)
Procedure
1. In the system web interface, go to Security > Wireless.
2. Specify your preferences:
▪ Select the Enable Wi-Fi option to clear the checkbox and disable screen mirroring for
Miracast-certified devices.
▪ Select the Enable Bluetooth option to clear the checkbox and disable screen mirroring for
AirPlay-certified devices.
Your preferences automatically update.
Port Usage
The Pano system uses a range of ports to handle communication with other systems, devices, and
network services.
Note: Your network must allow bidirectional communication between personal devices and the Pano
system.
Port Connections
The following table lists the inbound, outbound, and bidirectional ports used by the Pano system.
Security
Polycom, Inc. 35