Setting Description
Your IP Address Displays the system IP address.
If you need to create a static address, enter it
here.
This field is disabled if you set the IP Address
field to Obtain IP Address automatically.
Default Gateway Displays the gateway currently assigned to
the system.
If you need to create a static address, enter it
here.
This field is disabled if you set the IP Address
field to Obtain IP Address automatically.
Subnet Mask Displays the subnet mask currently assigned
to the system.
If you need to create a static address, enter it
here.
This field is disabled if you set the IP Address
field to Obtain IP Address automatically.
4. Configure the following IPv6 settings as needed:
Setting Description
Enable IPv6 Enables the IPv6 network stack and makes
the IPv6 settings available.
Enable SLAAC Specifies whether to use stateless address
autoconfiguration (SLAAC) instead of DHCP
to automatically obtain an IP address.
Link-Local Displays the IPv6 address used for local
communication within a subnet.
This setting is configurable only when you
select Enter IP address manually.
Site-Local Displays the IPv6 address used for
communication within the site or organization.
This setting is configurable only when you
select Enter IP address manually.
Global Address Displays the IPv6 Internet address.
This setting is configurable only when you
select Enter IP address manually.
Default Gateway Displays the gateway currently assigned to
the system.
Network Settings
Polycom, Inc. 24
To Next Page
Loading...
