Polycom Poly Trio C60 - Managing Multiple Calls

Procedure
» Do one of the following:
• Select DND on the Home screen, if enabled by your system administrator.
• Go to Settings > Features > Do Not Disturb and select Enable.
Disable Do Not Disturb
When you’re ready to receive calls, disable DND.
Procedure
» Go to Settings > Features > Do Not Disturb and select Disable.
Managing Multiple Calls
Manage multiple active, incoming, or held calls.
In the Calls screen, you can view active and held calls, including conference calls. The following figure
shows an active call and a held call.
Figure 6: Multiple calls on the calls screen
Manage a Call from the Calls Screen
From the Calls screen, you can manage a call by holding, resuming, or transferring the call.
Procedure
1. Select a call.
2. Do one of the following:
• Select Hold to place an active call on hold.
• Select Resume to make a held call active.
• Select Hang Up to end a call with a contact. You can end active calls only, so resume the
held call first before ending it.
• Select Transfer to send the call to another contact.
Mute the Microphones
Mute the microphone so other parties can't hear you.
Procedure
» Do one of the following:
▪ Select Mute .
▪ Select the Mute key on the phone.
▪ Select the Mute key on the microphone.
Audio Calls
30