Polycom SoundPoint IP 430 Quick Tip

Quick Tip
SoundPoint ® IP, SIP 3.1.0
3
The following figure shows the screen that appears when an attendant
phone is set up to monitor three remote lines (Helen Cooper, Z Wong, and
Ben North).
Selecting Attendant Ring Tones
You can select the ring tone that plays when a remote line “rings”. The same
ring tone plays for all remote lines. The default ring tone is a silent ring.
To select the attendant ring tone:
1. Press the Menu key, and then select Settings > Basic > Ring Type >
Attendant Calls.
The Ring Type screen appears.
2. Using the arrow keys, scroll to the ring tone you want.
To hear the selected ring tone, press the Play soft key.
3. Press the Select soft key.
4. Press the Menu key to return to the idle display.

Polycom SoundPoint IP 430 Specifications

Display

display resolution	132 x 46 pixels
message waiting indicator	Yes

Power

power over ethernet support	IEEE 802.3af
external AC adapter voltage	24V DC
power consumption	3.0W nominal (3.8W max)

Operating Environment

operating temperature range	10 to 40 degrees C (50 to 104 degrees F)
operating relative humidity	20% to 85%, non-condensing
storage temperature range	-40 to +70 degrees C (-40 to +160 degrees F)

Weight and Dimensions

dimensions	21 cm x 16.5 cm x 18 cm x 3 cm
shipping weight	1.9 kg