Polycom SoundPoint IP 430 Quick Tip

Quick Tip
SoundPoint ® IP, SIP 3.1.0
9
Handling Remote Calls When Your Phone Has an Incoming Call
You answer remote calls when your phone is in an alerting state in the same
way as you answer remote calls when your phone is in an idle state. However,
the following exceptions apply:
• The Attendant Calls ring tone does not play.
• The caller ID of the incoming call to your phone appears on the screen.
The caller ID of incoming call to the remote line does not appear.
• To view the caller ID of the remote line that is ringing (without answering
it), press and hold the line key.
• To answer the remote call, quickly press the line key.
The remote line caller ID appears highlighted on the screen along with the
incoming call on your phone.
Trademark Information
© 2009, Polycom, Inc. All rights reserved. POLYCOM
®
, the Polycom "Triangles" logo and the names and marks
associated with Polycom's products are trademarks and/or service marks of Polycom, Inc. and are registered and/or
common law marks in the United States and various other countries. All other trademarks are property of their respective
owners. No portion hereof may be reproduced or transmitted in any form or by any means, for any purpose other than
the recipient's personal use, without the express written permission of Polycom.

Polycom SoundPoint IP 430 Specifications

Display

display resolution	132 x 46 pixels
message waiting indicator	Yes

Power

power over ethernet support	IEEE 802.3af
external AC adapter voltage	24V DC
power consumption	3.0W nominal (3.8W max)

Operating Environment

operating temperature range	10 to 40 degrees C (50 to 104 degrees F)
operating relative humidity	20% to 85%, non-condensing
storage temperature range	-40 to +70 degrees C (-40 to +160 degrees F)

Weight and Dimensions

dimensions	21 cm x 16.5 cm x 18 cm x 3 cm
shipping weight	1.9 kg