Chapter 3 - System Commands
© Polycom, Inc. 3 - 99
marqueed-
isplaytext
marqueedisplaytext <set|get>
Where:
• set: Sets the text to display in the
dialing entry field followed by the text
to use. Enclose the string in
quotation marks if it includes
spaces.
• get: Returns the current marquee
display text.
Specifies the text to display in
the dialing entry field on the
home screen.
User interface screen location:
System > Admin Settings >
General Settings > Home
Screen Settings: Enter Mar-
quee Text
Note: This option is only avail-
able when dialingdisplay is set
to display marquee.
marqueedisplay-
text “select an
entry from the
directory”
ntpmode ntpmode <auto|off|manual|get>
Where:
• auto: Automatically selects an NTP
server from the Internet.
• off: Turns off the use of an NTP
server.
•manual: Lets you specify a server
using the ntpserver command on
page 3-99.
•get: Returns the current time server
mode.
Sets or gets the mode of the
system’s Network Time Protocol
(NTP) server. NTP server time
is used to ensure synchronized
time data in the local Call Detail
Report.
User interface screen location:
System > Admin Settings >
Network > IP > H.323 Settings
> NTP Setup
ntpmode auto
ntpserver ntpserver <set|get> <“DNS name or
ipaddress”>
Where:
• set: Sets the IP address of the NTP
server when followed by a valid
parameter.
•get: Gets the IP address of the NTP
server.
• “DNS name or ipaddress”: The
DNS name or IP address of the NTP
server.
Sets or gets an Network Time
Protocol (NTP) server, using the
IP address or the DNS name of
the server. This allows you to
use an internal time server and
thus synchronize the system’s
time with the time on your
internal network. The system
uses this time only for the local
Call Detail Report.
User interface screen location:
System > Admin Settings >
Network > IP > H.323 Settings
> NTP Setup
ntpserver set
time.xyzcorp.com
Command Syntax Description Example
To Next Page
Loading...
Need help?
General
