Integrator's Reference Manual for the VSX Series
3 - 102 www.polycom.com/videodocumentation
snapshot-
timeout
snapshottimeout <yes|no|get>
Where:
• yes: Enables the option: the display
times out after four minutes and the
system returns to live video.
•no: Disables the option: the
snapshot stays on screen
indefinitely.
• get: Returns the current setting (yes
or no).
Enables or disables the
Snapshot Timeout option. By
default, all slides and snapshots
are displayed for a period of four
minutes. When the display times
out after four minutes, the VSX
system automatically returns to
live video. However, when this
option is disabled, the snapshot
or slide stays on screen
indefinitely until the user
presses the SNAP button on the
remote control to return to live
video.
User interface screen location:
System > Admin Settings >
Monitors > Monitors: Snap-
shot Timeout
snapshottimeout
no
snmpadmin snmpadmin <set|get> ["admin
name"]
Where:
• set: Sets the administrator name
when followed by the “admin name”
parameter. To erase the current
setting, omit “admin name”.
• get: Returns the current setting.
• “admin name”: SNMP
administrator contact name.
Character string. Enclose the
character string in quotation marks if
it includes spaces. Example: “John
Admin”
Sets or gets the SNMP
administrator name.
User interface screen location:
System > Admin Settings >
Global Services > SNMP: Con-
tact Name
snmpadmin set
"John Admin"
snmpcom-
munity
snmpcommunity <set|get> ["com-
munity name"]
Where:
• set: Sets the SNMP community
name when followed by the
“community name” parameter. To
erase the current setting, omit the
parameter.
• get: Returns the current setting.
•“community name”: SNMP
community name. Character string.
Enclose the character string in
quotation marks if it includes
spaces.
Sets or gets the SNMP
community name.
User interface screen location:
System > Admin Settings >
Global Services > SNMP:
Community
snmpcommunity set
Public
Command Syntax Description Example
To Next Page
Loading...
Need help?
General
